• High Quality Lightning Arrester Product

    High Quality Lightning Arrester Product

    The function of the arrester

    The main function of the zinc oxide arrester is to prevent the intrusion of lightning waves or internal overvoltage. Usually, the arrester is connected in parallel with the protected device. When the line is struck by lightning and has overvoltage or internal operating overvoltage, the lightning arrester is discharged to the ground to avoid voltage shock waves and prevent the insulation of the protected equipment from being damaged.

  • High Quality Outdoor Box-Type Substation

    High Quality Outdoor Box-Type Substation

    Product use environmental conditions

    Ambient temperature: upper limit +40°C, lower limit -25°C; altitude does not exceed 1000M.

    The indoor wind speed does not exceed 35mm/s; relative temperature: the daily average value is not more than 95%, the monthly average value is not more than 90%, and the monthly average value is not more than 90%.

    The seismic intensity does not exceed 8 degrees; there is no fire, explosion hazard, serious pollution, chemical corrosion and severe vibration.

  • GCS Low Voltage Withdrawable Complete Switchgear

    GCS Low Voltage Withdrawable Complete Switchgear

    GCS low-voltage withdrawable complete switchgear (hereinafter referred to as the device) is developed by the joint design group of the former Ministry of Machinery and the Ministry of Electric Power according to the requirements of the industry competent authorities, the majority of power users and design units. It is in line with national conditions, has high technical performance indicators, and can A low-voltage withdrawable switchgear that meets the development needs of the power market and can compete with existing imported products. The device passed the appraisal jointly hosted by the two departments in Shanghai in July 1996, and was valued and affirmed by the manufacturing unit and the power user department.

    The device is suitable for power distribution systems in power plants, petroleum, chemical, metallurgy, textile, high-rise buildings and other industries. In large power plants, petrochemical systems and other places with a high degree of automation, the places that require the interface with the computer are used as three-phase AC 50 (60) Hz, rated working voltage 380V, rated current 4000A and below in the power distribution and power supply systems for power distribution and motor concentration Low-voltage complete power distribution device used for control and reactive power compensation.

  • European-Style Box-Type Substation

    European-Style Box-Type Substation

    Product Usage

    It is suitable for small unattended substations with voltages of 35KV and below, and main transformer capacity of 5000KVA and below.

  • American Box Type Substation

    American Box Type Substation

    The main parameters

    1) The wiring form of the box transformer: one or two 10KV incoming lines.

    For a single transformer, the capacity is generally 500KVA~800KVA; 4~6 low-voltage outgoing cables are used.

    2) The main components of the box change:

    Transformer, 10KV ring network switch, 10KV cable plug, low-voltage pile head box and other main components. It has the advantages of small size, low cost and easy installation.

  • Mine Flameproof Dry-Type Transformer

    Mine Flameproof Dry-Type Transformer

    The coils of mine flameproof dry-type transformers are made of Class C insulating materials and are treated with vacuum pressure dipping to improve mechanical strength and moisture resistance. Special paint for iron core; product performance is better than GB8286 “flameproof mobile substation for mining” standard, product insulation material temperature resistance grade is H or C grade, cooling method, voltage regulation method is non-excitation voltage regulation, protection grade is IP54.

  • KS11 Series 10KV Mine Oil-Immersed Transformer

    KS11 Series 10KV Mine Oil-Immersed Transformer

    This series of products are made of high-quality grain-oriented, high-quality and high-permeability silicon steel sheets stacked. The low-noise and low-loss fuel tank has a sturdy structure. High and low-voltage cable junction boxes are welded on both sides of the tank wall. They are used for cable wiring. The high-voltage coil must have a tap voltage of ±5% of the rated voltage. .The power supply must be cut off first, and then the wind and rain of the tap switch on the box wall must be removed to convert the voltage transformer. The low-voltage side of the voltage transformer allows the “Y” type to be connected to 693V or the “D” type to be connected to 400V for power supply, and the secondary is directly installed in the cable junction box. The end leads out six porcelain sleeves for the user to connect the transformer hoisting and use the hoisting climb welded on the box wall. The bottom of the transformer box is equipped with a skid, and there are installation holes on the skid, which can be used for mines and mine cart rollers when needed.

    KS11 series mine transformers are used as power distribution equipment for mine consolidation. The product has the characteristics of small size, easy to merge, reasonable structure, low loss and good thermal performance.

  • 110kV Power Transformer

    110kV Power Transformer

    The company’s 110kV power transformer is a product successfully produced through continuous exploration and improvement on the basis of digesting and absorbing advanced transformer manufacturing technology at home and abroad, combined with the company’s production experience, and its reliability and performance indicators have reached the domestic advanced level. .After continuous improvement and improvement, the company has a series of transformer products.

  • 11kv Three-Phase Oil-Immersed Transformer

    11kv Three-Phase Oil-Immersed Transformer

    ·The core is made of high-quality cold-rolled silicon wafers with full bevel cut, no puncture structure, and the coils are made of high-quality oxygen-free copper.

    ·It features a corrugated fin or expansion radiator tank.

    ·Reduced transformer height as no oil reservoir is required.

    ·Since the transformer oil is not in contact with the air, its oil aging is delayed, thus extending the life of the transformer.

  • ZGS11-Z.T Series Combined Transformer For Photovoltaic Power Generation

    ZGS11-Z.T Series Combined Transformer For Photovoltaic Power Generation

    Photovoltaic power generation has developed rapidly at home and abroad as a clean energy production method. ZGS-Z.T-□/□ series combined transformers are just to meet the increasing power supply requirements of photovoltaic power generation. Our company produces 10KV/35KV combined type transformers On the basis of the transformer, it digests and absorbs the advanced technology at home and abroad and develops a series of products by itself. , It adopts a fully sealed structure, the shell adopts a split body, shot peening, pickling, phosphating, spraying primer intermediate paint and topcoat separately to achieve surface corrosion resistance, thickness resistance, and UV resistance. Small size, light weight and easy installation.

  • Pre-Installed Box Type Substation

    Pre-Installed Box Type Substation

    Prefabricated substation (hereinafter referred to as box substation) is a power distribution equipment assembled into one or several boxes by high-voltage switchgear, distribution transformer, low-voltage switchgear, electric energy metering device and power factor compensation device. It is widely used in urban high-rise buildings, residential quarters, factories and mines, street lamps, hotels, oil fields, airports, hospitals, stations, wharves, shopping malls and other places. This product has strong complete set, short installation period and safe operation.

  • Mobile Box-Type Substation

    Mobile Box-Type Substation

    Mobile box-type substation is a kind of high-voltage switchgear, distribution transformer and low-voltage power distribution device, which are prefabricated indoor and outdoor compact power distribution equipment in a factory according to a certain wiring scheme. The functions are organically combined and installed in a moisture-proof, rust-proof, dust-proof, rat-proof, fire-proof, anti-theft, heat-insulating, fully-enclosed, movable steel structure box, especially suitable for urban network construction and renovation, and is the second largest civil substation. A new kind of substation that has risen since then. Box-type substations are suitable for mines, factories, oil and gas fields and wind power stations.

123 Next > >> Page 1 / 3